Determination of the absolute configurations of natural products via density functional theory calculations of vibrational circular dichroism, electronic circular dichroism, and optical rotation: the iridoids plumericin and isoplumericin

The absolute configurations (ACs) of the iridoid natural products, plumericin (1) and isoplumericin (2), have been re-investigated using vibrational circular dichroism (VCD) spectroscopy, electronic circular dichroism (ECD) spectroscopy, and optical rotatory dispersion (ORD). Comparison of DFT calculations of the VCD spectra of 1 and 2 to the experimental VCD spectra of the natural products, (+)-1 and (+)-2, leads unambiguously to the AC (1R,5S,8S,9S,10S)-(+) for both 1 and 2. In contrast, comparison of time-dependent DFT (TDDFT) calculations of the ECD spectra of 1 and 2 to the experimental spectra of (+)-1 and (+)-2 does not permit definitive assignment of their ACs. On the other hand, TDDFT calculations of the ORD of (1R,5S,8S,9S,10S)-1 and -2 over the range of 365-589 nm are in excellent agreement with the experimental data of (+)-1 and (+)-2, confirming the ACs derived from the VCD spectra. Thus, the ACs initially proposed by Albers-Sch?nberg and Schmid are shown to be correct, and the opposite ACs recently derived from the ECD spectra of 1 and 2 by Els?sser et al. are shown to be incorrect. As a result, the ACs of other iridoid natural products obtained by chemical correlation with 1 and 2 are not in need of revision.     

X-ray spectrometry using polycapillary X-ray optics and position sensitive detector

Polycapillary X-ray optics (capillary X-ray lens) are now popular in X-ray fluorescence (XRF) analysis. Such an X-ray lens can collect X-rays emitted from an X-ray source in a large solid angle and form a very intense X-ray microbeam which is very convenient for microbeam X-ray fluorescence (MXRF) analysis giving low minimum detection limits (MDLs) in energy dispersive X-ray fluorescence (EDXRF). A new method called position sensitive X-ray spectrometry (PSXS) which combines an X-ray lens used to form an intense XRF source and a position sensitive detector (PSD) used for wavelength dispersive spectrometry (WDS) measurement was developed recently in the X-ray Optics Laboratory of Institute of Low Energy Nuclear Physics (ILENP) at Beijing Normal University. Such a method can give high energy and spacial resolution and high detection efficiency simultaneously. A short view of development of both the EDXRF using a capillary X-ray lens and the new PSXS is given in this paper.     

meso-四(4-甲氧基-3磺酸基苯)卟啉与环糊精超分子体系的研究

采用极谱法、紫外可见光谱法及荧光光谱法研究了水溶性卟啉T(4-Mop)PS4与α-CD、-βCD、γ-CD、Hp-β-CD及SBE--βCD 5种环糊精的相互作用,结果表明T(4-Mop)PS4分别与这5种环糊精形成了T(4-Mop)PS4-CD s超分子体系。此外,本研究还采用极谱法、紫外可见光谱法及荧光光谱法测定了T(4-Mop)PS4-CD s超分子体系的包结常数和包结比,比较了T(4-Mop)PS4与5种环糊精的包结能力,并由此推测了包结机理,为T(4-Mop)PS4卟啉、环糊精的进一步应用提供了理论信息。     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

In-channel atom-transfer radical polymerization of thermoset polyester microfluidic devices for bioanalytical applications

A new technique for polymer microchannel surface modification, called in-channel atom-transfer radical polymerization, has been developed and applied in the surface derivatization of thermoset polyester (TPE) microdevices with poly(ethylene glycol) (PEG). X-ray photoelectron spectroscopy, electroosmotic flow (EOF), and contact angle measurements indicate that PEG has been grafted on the TPE surface. Moreover, PEG-modified microchannels have much lower and more pH-stable EOF, more hydrophilic surfaces and reduced nonspecific protein adsorption. Capillary electrophoresis separation of amino acid and peptide mixtures in these PEG-modified TPE microchips had good reproducibility. Phosducin-like protein and phosphorylated phosducin-like protein were also separated to measure the phosphorylation efficiency. Our results indicate that PEG-grafted TPE microchips have broad potential application in biomolecular analysis.     

Poly (3-(3-pyridyl) acrylic acid) modified glassy carbon electrode for simultaneous determination of dopamine, ascorbic acid and uric acid

Trans-3-(3-pyridyl) acrylic acid (PAA) was deposited on glassy carbon electrode (GCE) by electropolymerization in pH 7.0 phosphate buffer solution (PBS). The poly (3-(3-pyridyl) acrylic acid) (PPAA) film modified glassy carbon electrode shows an excellent electrochemical response for dopamine (DA), ascorbic acid (AA) and uric acid (UA). The cyclic voltammetry oxidation peaks for DA and AA, DA and UA, AA and UA are separated by 150 mV, 130 mV and 280 mV, respectively. This permits the simultaneous determination of AA, DA and UA. The interference of AA with the determination of DA could be eliminated because of the electrostatic interaction between DA cations and the negatively charged PPAA film at pH 7.0. The anodic peak currents of DA, AA and UA increase linearly with concentration in the range of 1-40 micromol L(-1), 10-400 micromol L(-1) and 1.6-80 micromol L(-1), respectively, with a correlation coefficient (r) always higher than 0.998. The detection limit is 0.06 micromol L(-1), 0.8 micromol L(-1) and 1.1 micromol L(-1) for DA, AA and UA, respectively.     

Thermoresponsive copolymer nanofilms for controlling cell adhesion, growth, and detachment

This study reports the development and use of a novel thermoresponsive polymeric nanofilm for controlling cell adhesion and growth at 37 °C, and then cell detachment for cell recovery by subsequent temperature drop to the ambient temperature, without enzymatic cleavage or mechanical scraping. A copolymer, poly(N-isopropylacrylamide-co-hydroxypropyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (abbreviated PNIPAAm copolymer), was synthesized by free radical polymerization. The thermoresponses of the copolymer in aqueous solution were demonstrated by dynamic light scattering (DLS) through detecting the sensitive changes of copolymer aggregation against temperature. The DLS measurements revealed the lower critical solution temperature (LCST) at approximately 30 °C. The PNIPAAm film stability and robustness was provided through silyl cross-linking within the film and with the hydroxyl groups on the substrate surface. Film thickness, stability, and reversibility with respect to temperature switches were examined by spectroscopic ellipsometry (SE), atomic force microscopy (AFM), and contact angle measurements. The results confirmed the high extent of thermosensitivity and structural restoration based on the alterations of film thickness and surface wettability. The effective control of adhesion, growth, and detachment of HeLa and HEK293 cells demonstrated the physical controllability and cellular compatibility of the copolymer nanofilms. These PNIPAAm copolymer nanofilms could open up a convenient interfacial mediation for cell film production and cell expansion by nonenzymatic and nonmechanical cell recovery.     

Operator splitting algorithm for isokinetic SLLOD molecular dynamics

We apply an operator splitting method to develop a simulation algorithm that has complete analytical solutions for the Gaussian thermostated SLLOD equations of motion [D. J. Evans and G. P. Morriss, Phys. Rev. A 30, 1528 (1984)] for a system under shear. This leads to a homogeneous algorithm for performing both equilibrium and nonequilibrium isokinetic molecular dynamics simulation. The resulting algorithm is computationally efficient. In particular, larger integration time steps can be used compared to simulations with regular Gaussian thermostated SLLOD equations of motion. The utility and accuracy of the algorithm are demonstrated through application to the Weeks-Chandler-Anderson fluid. Although strict conservation of the kinetic energy suppresses thermal fluctuations in the system, this algorithm does not allow simulations at lower shear rates than those normally afforded by older nonequilibrium molecular dynamics simulations.     

8—氮鸟嘌呤的极谱伏安行为

用循环伏安法（ＣＶ）、电流采样极诸法（ＳＣＰ，即ＴＡＳＴ）、常规脉冲极谱法（ＮＰＰ）、微分脉冲极谱法（ＤＰＰ）、线性扫描伏安法（ＬＳＶ）、Ｏｓｔｅｒｙｏｕｎｇ方波伏安法（ＯＳＷＶ）和计时库仑法（ＣＣ）等电化学技术研究了抗癌药物８－氮鸟嘌呤（８－ａｚａｇｕａｎｉｎｅ，ｇｕａｎａｚｏｌｏ，简称８－ＡＧ）的极谱伏安行为．在 ０． １ｍｏｌ／Ｌ Ｈ２ＳＯ４底液中，８－ＡＧ有一良好的还原峰，峰电位（Ｅｐ）在－０． ９５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ，下同）附近，８－ＡＧ浓度在４×１０－６～８×１０－４ｍｏｌ／Ｌ范围内．峰高与浓度有良好的线性关系，线性相关系数ｒ＝０．９９９９～０．９９１０，检出限为１× １０－６ｍｏｌ／Ｌ．实验证明了该峰具有吸附性．本文提出了电极反应机理，它包括：酸性介质中８－ＡＧ的质子化、质子化的８－ＡＧ在汞电极上吸附以及完全不可逆的两电子还原过程．同时用量子化学计算方法（全略微分重叠法即ＣＮＤＯ／２）对８－ＡＧ和鸟嘌呤的各原子的净电荷以及Ｗｉｂｅｒｇ键级进行了计算，从理论上解释了８－ＡＧ的电化学还原机理。